South Bend Single Disc Clutch & Flywheel 400 HP 800 ft. lbs. torque – 88-04 Dodge Cummins 5.9L – 13125-OK
$849.18
In stock
Description
Fits the below transmissions with the stock 1-1/4″ input:
1988-1993 / 5.9L DIESEL GETRAG 5 SPEED
1994-2004 / 5.9L DIESEL NV4500 NON-HO NV5600
1999-2000.5 / 5.9L DIESEL NV4500 NON-HO NV5600
Part No. 13125-OK
Comes with Free Shipping
Rated for 400 Horsepower and 800 Foot Pounds of Torque
Clutch Kit includes – Clutch Disc, Pressure Plate, Flywheel, Throwout Bearing, Hardware and Alignment Tool. Note: All needed hardware is included.
This Dyna Max kit features an organic lining on a marcelled fin. The pressure plate is modified for higher plate load and smoothness of engagement. This clutch was designed to cure premature disk failure due to high horse power and heavy hauling in the 5 speed and early 6 speed non-ETH 12 1/4″ clutches. We have taken the 13″ ETH clutch and modified it to accept the 1 1/4″ input shaft. By doing this, it enabled us to offer a disk center that is 2-3 times larger and stronger then can be provided in the 12 1/4″ clutch kits. This kit comes with a flywheel, re-drilled and refaced to accept the larger clutch and is rated to handle up to 400 horsepower & 800 ft. lbs. of torque.
Comes with a 12 months or 12,000 mile warranty. Includes repair or replacement of the defective product.
You might also be interested in South Bend Hydraulics – click link below for more information:
1994-1997 Trucks – Part # HYD-HD
1998-02 Trucks – Part # HYDX1.50
2003-06 Trucks – Part # HYDX-750
