NP 271 Transfer Case for Dodge Ram & Ford

NP271 for Dodge Ram & Ford

NP271 Transfer Case for Dodge Ram 2500 & 3500
and Ford F250, F350 & F450

  • Quality Tested and Inspected
  • 1 Year Warranty, unlimited miles; 6 Months if for commercial use
  • OE Quality Replacement Parts In Every Rebuilt UnitPlease calll to order due to application variations – 888-316-2940

Transfer Cases are tested before leaving the factory. This model is a chain driven manual shift and part time transfer case. The output is on the driver-side with center rear output. This unit has been utilized in Dodge and Ford pickup trucks F250, F350, F450 and F550 from1999-Up. This heavy duty design is rated at gross vehicle weight of 17,500 lbs in vehicles with 5.3 L to 7.3 L diesels. The NP271 is a heavy duty version has a 6 pinion planet and utilizes a 1.5″ wide chain, designed specifically for durability with emphasis for high strength and long-term durabiliity.

The NP271 has 2.72:1 ratio, and has a aluminum case has either 4WD partl-time manual shift. These units have different input spline counts: Dodges have 23 and 29 spline inputs. Ford uses 24 spline with manual transmissions and 31 and 34 spline units. Both Dodge and Ford NP271 transfer cases have driveside drops. Recommended fluid is Automatic Transmission Fluid ATF. We can provide a rebuilt NP271 transfer cases with a 12 month warranty we also offer all parts required to rebuild your unit, we have new parts we can also provide good used takeout parts.

Transfer Cases are tested before leaving the factory. This model is a chain driven manual shift and part time transfer case. The output is on the driver-side with center rear output. This unit has been utilized in Dodge and Ford pickup trucks F250, F350, F450 and F550 from 1999-Up. This heavy duty design is rated at gross vehicle weight of 17,500 lbs in vehicles with 5.3 L to 7.3 L diesels. The NP271 is a heavy duty version has a 6 pinion planet and utilizes a 1.5″ wide chain, designed specifically for durability with emphasis for high strength and long-term durabiliity.The NP271 has 2.72:1 ratio, and has a aluminum case has either 4WD partl-time manual shift. These units have different input spline counts: Dodges have 23 and 29 spline inputs. Ford uses 24 spline with manual transmissions and 31 and 34 spline units. Both Dodge and Ford NP271 transfer cases have driveside drops. Recommended fluid is Automatic Transmission Fluid ATF. We can provide a rebuilt NP271 transfer cases with a 12 month warranty we also offer all parts required to rebuild your unit, we have new parts we can also provide good used takeout parts.

Rebuilt Tested NP271 Transfer Cases 12 month warranty

DescriptionPriceCore Charge
Dodge Ram Manual Shift 2003 & Up$1150.00$500.00
Ford F250 1999-2003 $850.00$350.00
ApplicationsModel Years
Dodge 2500 23 spline input 34 spline output2003-2006

2003-2006
Dodge 3500 23 spline input rear flange output
2007-2009
Dodge 3500 23 spline input 34 spline output2003-2008
Dodge 4500 29 spline input rear flange output2007-2009
Dodge 4500 29 spline input rear flange output2007-2009
Ford F250 & F350 34 spline input rear slip2008-2009
Ford F250 & F350 34 spline input2003-2007
Ford F250 & F350 24 spline input1999-2005
Ford F250 & F350 31 spline input1999-2003
Ford F450 34 spline input rear slip2008-2009
Ford F450 34 spline input Auto Trans2003-2006
Ford F450 24 spline input,Manual Trans1999-2005
Ford F450 31 spline input Auto Trans1999-2003
Ford F450 34 spline input rear slip2008-2009